This is a list of braces and boring tools for sale. Some of them will have a button to click to see a picture. Instead of having to load each image to continue, just scroll this list and click to see an image. This list has Braces, Hollow Augers, Spoke Pointers, Angle Devices, and Bits and Accessories. I'm including push drills and screwdrivers ... you can get drill bits for the screwdrivers.

Note: I have a Tool Order Form that goes through a secure server and will be encrypted when you return it. So, it is safe to give credit card information. Just click on Click To Order in any section, or right here.

  Back To Tool Index    Back to Home page

Boring Machines, Auger handles, etc.

[CLICK TO ORDER]

Boring Machine Bits:

1 inch, 11 3/4 inches overall, 1/2 inch shaft, G .............. Sold $30.00

2 inch, 1/2 inch shaft. The overall length is 15 inches. That's extra long, and may be used to bore complete holes through larger timbers, G+ .............. $40.00
Picture

1. ELLRICH HDW CO., ADJUSTABLE AUGER HANDLE. The chuck holds large tanged bits. Pat April 15, 1884 cast in the metal, G ........... $40.00
   Picture

2. MILLERS FALLS NO. 4, RATCHET AUGER HANDLE. The beefy chuck holds large tanged bits, for timber framing. Ratchets right or left. One side handle can be attached to the top for work in tight places. About 90% of the black enamel and nickel plating remains. Has seen light use and is still in excellent user condition, G+++ ........... $110.00
   Picture

Braces

[CLICK TO ORDER]

1. NORTH BROS. YANKEE NO. 75, RATCHET PUSH BRACE, Has patent from 1895 to 1912. 16 1/4 inches long when closed, extends to 23 1/2 inches.
   Alligator-jaw chuck holds tanged bits up to 1/2 inch. The nickel plating has some wear and tool-box scratches, G+ ............... $80.00
   Picture

2. STANLEY NO. 923-8 BRACE, 8 inch sweep. Made in USA logo. Universal jaws hold all ordinary size taper shank bits, also round shank bits or drills from 1/8 to 1/2 inch in diameter. A high-quality artisan's tool. Bronze bushed, ball bearing head. Box ratchet. Some minor scuffing to the stained hardwood pad and handle. The plating looks like it is from WW II, some minor rust. The works are still tight and completely functional, G++ .............. $65.00
   Picture

3. NORTH BROS. YANKEE NO. 2100-10 IN BRACE. 10 inch sweep. This is an early one with the 1923 and 1925 patent dates. A brace of the highest quality. Ball Bearings throughout, Closed Ratchet. The chuck has alligator jaws that hold round, square or taper shanks up to 1/2 inch in diameter. These braces have the reputation of being the best. Very smooth ratcheting action. The handle and pad are of hard rubber that is practically indestructible. Yankee on the pad. Virtually all of the chrome plating remains (it's chrome on this one). Smooth ratchet. Tight and operates perfectly. A great brace, Fine ............ Sold $210.00
   Picture

4. NORTH BROS. YANKEE NO. 2101-10 IN BRACE. 10 inch sweep. Pre-Stanley with the 1923 and 1925 patent dates. A brace of the highest quality. Ball Bearings throughout, Closed Ratchet. The chuck has alligator jaws that hold round, square or taper shanks up to 1/2 inch in diameter. These braces have the reputation of being the best. Has composition plastic handle and pad are very nice. Almost all of the nickel plating remains. Missing mainly on the frame where it looks like someone filed off the "Bell Systems". Smooth action,ratchet works great, Fine ............ $150.00
   Picture

5. STANLEY YANKEE NO. 2101-10 IN BRACE. 10 inch sweep. A brace of the highest quality. Ball Bearings throughout, Closed Ratchet. The chuck has alligator jaws that hold round, square or taper shanks up to 1/2 inch in diameter. These braces have the reputation of being the best. Has composition plastic handle and pad. Somewhat cosmetically challenged, but still tight and completely functional. Smooth action,ratchet works great, G+ ............ $80.00
   Picture

6. STANLEY NO. 921-10 BRACE, The highest quality in workmanship and materials, together with the novel design, place these braces in a class by themselves as to strength, durability and appearance. Cocobolo head and handle have many tool-box dings. Ball bearing head, concealed ratchet that keeps out dirt and moisture, and alligator jaws that hold all ordinary size taper shank bits, also small or medium round shank bits or drills. 90% plating remains, G++ .............. $80.00
   Picture

7. PEXTO SAMSON 8010B, 10 inch sweep. This has the "Samson" patent ball bearing chuck, Extra Knurled and Machine Cut thread. Patent alligator pattern jaws - forged steel, machined and hardened, flat on bottom giving perfect alignment, holds ANY shank bits, 1/8 to 1/2 inch capacity. Box ring ratchet, extra-heavy sweep. Has a stop collar which prevents the shell from coming off when opened to full capacity. Dark rosewood head, full steel clad and ball bearing, and pad are nice with minor tool-box dings. Most of the nickel plating remains, Fine ...........85.00
   Picture

8. PEXTO 110, 10 inch sweep. I don't see many of these. Pexto made high-quality tools. This one looks like it is from WW II. Has cadmium plating and hardwood handle and pad. The chuck holds ANY shank bits, 1/8 to 1/2 inch capacity. Has some light rust, G+ ........... $40.00
   Picture

9. MILLERS FALLS NO. 1322, BARBER IMPROVED RATCHET BRACE, 10 inch sweep. Ball bearing head. Boxed ratchet (means it's enclosed) with ring shift. Forged steel alligator jaws hold tanged bitstock tools and many sizes of round and irregular shanks. 99% nickel-plating. The ebonized handle and pad are crisp, Fine+ ................ $50.00
   Picture

10. LAKESIDE BRACE, 10 inch sweep. This is an early brace that looks like it was made by Pexto. It has the long ball-bearing chuck, designed for carpenters using tanged auger bits. 80% of the nickel plating remains. Closed ratchet. Rosewood head and handle, G+ ........... $40.00
    Picture

11. STANLEY NO. 923-12 BRACE, 12 inch sweep. Notched-rectangle logo. Universal jaws hold all ordinary size taper shank bits, also round shank bits or drills from 1/8 to 1/2 inch in diameter. A high-quality artisan's tool. Bronze bushed, ball bearing head. Box ratchet. Cocobolo pad and handle have a few tool-box dings. 90% of the nickel plating remains. A good user for heavier work, G++ .............. $75.00
    Picture

[CLICK TO ORDER]

Hollow augers are used to cut round tenons for making chairs or wagon spokes. They are preceded with a spoke pointer to make a conical end that centers the hollow auger on the work.

A. A. Wood Hollow Auger Note: If you are having trouble with using the A. A. Wood Hollow Auger, the new original cutters have the point ground off, so then the cutter can get close to, and parallel to, the throat, and the point doesn't stick out. You should get a cleaner cut by grinding off that point. Most of the cutters have been ground to a lesser bevel by the user, so, I assume it works, but not the best.

1. A. A. WOOD & SONS, adjustable hollow auger. These are considered to be the Cadillac of hollow augers. Fully adjustable, cuts from 1/4 to 1 1/4 inch diameters. This one is in crisp condition, 96% of the black enamel remains. A little sharpening of the cutter will have this one ready to go.
   Has been lightly cleaned. A very nice tool that has had little use. I'll include a copy of the instructions, Fine .......... $165.00
   Picture

2. A. A. WOOD & SONS, adjustable hollow auger. These are considered to be the Cadillac of hollow augers. Fully adjustable, cuts from 1/4 to 1 1/4 inch diameters. This is the early style with the locking screw (which is usually mising) on the side. 90% of the black enamel remains. Good length to the cutter. A sharpening and a little lapping of the cutter will have this one ready to go. There is some light patina on the bare-metal surfaces. I'll include a copy of the instructions, G++ .......... $135.00
   Picture

3. HARGRAVE ( CINCINNATI TOOL CO. ) NO. 334, LARGE ADJUSTABLE HOLLOW AUGER. A large, heavy-duty hollow auger by a major American tool producer. Cuts any size tenon from 1/4 to 1 1/2 inches. Includes depth stop. It was given a coat of red paint at one time, G+ ........... $95.00
   Picture

4. E. C. STEARNS NO. 30, ADJUSTABLE HOLLOW AUGER. Cuts any size tenon from 1/4 to 1 1/4 inches. The pivoted clamshell jaws are provided with a graduated scale by which the size of the tenon is regulated. Complete with depth stop. Has about 75% of the black and red enamel, G+ ........... $75.00
   Picture

5. MILLERS FALLS ADJUSTABLE HOLLOW AUGER. Cuts any size tenon from 1/4 to 1 1/4 inches. The pivoted jaws are provided with a graduated scale by which the size of the tenon is regulated. Complete with the depth stop. Has about 85% of the black and red enamel. Has been cleaned, G+ ........... $65.00
   Picture

6. G. M. STEARNS ADJUSTABLE HOLLOW AUGER. An early type with Pat Mar. 5, 1878 stamped on it. Cuts from 3/8 to 1 inch daimeter. Has the depth stop. 70% black enamel remains, G+ ........... Sold $75.00
   Picture

Spoke Pointers

[CLICK TO ORDER]

Spoke pointers are used to make a conical end on your stock to precede the hollow auger. Provides a firm start that is centered on the work. Dowel pointers are for smaller work, and can be used to chamfer (bevel) the tips of pegs for gluing joints.

1. STANLEY NO. 22 DOWEL SHARPENER. Looks like it will point up to 3/4 inch. Used to chamfer the edges of dowels for gluing-up joints in table tops or cabinet doors. It also points small stock for chairs or twig projects, for tenoning with a hollow auger. All of the nickel plating remains, these are new-old-stock, Fine .......... $40.00
   Picture

2. STANLEY NO. 22 DOWEL SHARPENER. STANLEY Looks like it will point up to 3/4 inch. Used to chamfer the edges of dowels for gluing-up joints in table tops or cabinet doors. It also points small stock for chairs or twig projects, for tenoning with a hollow auger. Almost all of the nickel plating remains, with a bit of stain, G++ .......... $30.00
   Picture

3. SPOKE POINTER, SMALL NO. 1 SIZE. This one is unmarked, but probably made by Stearns. The adjustable, graduated tang is also a depth stop. Points up to 1 7/8 inch diameters. 80% black enamel remains. Great cutter length. Has been lightly cleaned. A good user, G+ .............. $45.00
   Picture

4. SPOKE POINTER, LARGE NO. 2 SIZE. This one is unmarked, but probably made by Stearns. The adjustable, graduated tang is also a depth stop. Points up to 2 5/8 inch diameter stock. Most of the black enamel remains. Good length to the cutter. Has been lightly cleaned, G++ ............ Sold $70.00
   Picture

5. HARGRAVE ( CINCINNATI TOOL CO. ) NO. 343 LARGE SPOKE POINTER. Cuts up to 2 1/2 inch diameter. This brand has a steeper angle of cut, which I like - it cuts better, like a low-angle plane. Almost all of the black enamel remains. This one has the depth stop (one of the very few I have seen). This is a very crisp example, Fine .............. $95.00
   Picture

6. HARGRAVE ( CINCINNATI TOOL CO. ) NO. 343 LARGE SPOKE POINTER. Cuts up to 2 1/2 inch diameter. This brand has a steeper angle of cut, which I like - it cuts better, like a low-angle plane. It has been nickel plated at some time. This one has the depth stop slot, but no depth stop, which could be made from a modified bolt. Good cutter length, G+ ........... $40.00
   Picture

7. JAMES SWAN SPOKE POINTER, SMALL SIZE. This is an early one, from the late 1800s. Points up to 2 inch diameter. The outside screws help keep the cutter adjusted, G+ ........... Sold $40.00
   Picture

[CLICK TO ORDER]

1. STANLEY SET NO. BX-D 32 1/2 QUARTERS, No. 100 SPUR AUGER BITS. In super-nice condition. This a later set made by Stanley, USA
   The genuine Russell Jennings pattern, Extension Lip Auger Bits are made of special analysis steel, forged carefully. The bits in this set have the standard double thread point, and are unsurpassed for accurate work in seasoned woods not extremely gummy or hard.
   Marked on the shank Russell Jennings, No. 100, made in USA and the fraction.
   The set has 13 bits, size 4-5-6-7-8-9-10-11-12-13-14-15-16, in 1/16th inch increments. All the sixteenths add up to 32 1/2 quarter-inches, which is where the set number comes from. The bits have had very light use, and are in shiny-nice condition. The spurs and lead-screws are in nice condition, but a few may need a bit of touch-up sharpening. Many of the wrapers are there, but they are below the bits.
   The outside of the wooden box is really nice with a few scuffs. The outside cardboard box has some damage, Fine++ ................. $240.00
   Picture
   Picture outside box

2. STANLEY SET NO. 32 1/2 QUARTERS, No. 100 SPUR AUGER BITS. In very nice condition with good spurs and lead screws. This a later set produced by Stanley, New Britain, Connecticut.
   The genuine Russell Jennings pattern, Extension Lip Auger Bits are made of special analysis steel, forged carefully. The bits in this set have the standard double thread point, and are unsurpassed for accurate work in seasoned woods not extremely gummy or hard.
   Marked on the shank Russell Jennings, Stanley, No. 100, 100 Plus, and Made in USA.
   The set has 13 bits, size 4-5-6-7-8-9-10-11-12-13-14-15-16, in 1/16th inch increments. All the sixteenths add up to 32 1/2 quarter-inches, which is where the set number comes from. The bits have had very light use, and they are in shiny-nice condition with some very minor tarnish. Some may need a touch-up sharpening. The outside of the box has some scuffs. A dado on one side of the bottom was broken out and there are some brads to fix it, Fine ................. $175.00
   Picture
   Picture box

3. STANLEY SET NO. 32 1/2 QUARTERS, No. 100 SPUR AUGER BITS. Very nice later set. The genuine Russell Jennings pattern, Extension Lip Auger Bits are made of special analysis steel, forged carefully. The bits in this set have the standard double thread point, and are unsurpassed for accurate work in seasoned woods not extremely gummy or hard.
   Marked on the shank Russell Jennings, No. 100, and Made in USA. The bits are shiny-nice with good spurs and lead-screws.
   The set has 13 bits, size 4-5-6-7-8-9-10-11-12-13-14-15-16, in 1/16th inch increments. All the sixteenths add up to 32 1/2 quarter-inches, which is where the set number comes from. The bits have had light use. Some may need a little touch-up with sharpening. The box is very nice, but the label is marked for No. 101 bits. If you can live with that, you will like this set, Fine ................. $185.00
   Picture
   Picture box

4. RUSSELL JENNINGS SET NO. 32 1/2 QUARTERS, No. 100 SPUR AUGER BITS. The bits in this set have the standard double thread point, and are unsurpassed for accurate work in seasoned woods not extremely gummy or hard.
   The set has 13 bits, size 4-5-6-7-8-9-10-11-12-13-14-15-16, in 1/16th inch increments. All the sixteenths add up to 32 1/2 quarter-inches, which is where the set number comes from. Marked Russell Jennings and Made in USA on the shafts. The bits have had light use, and are in very crisp condition. Some have a little bit of very light rust, but the tips are nice. Some may need a touch-up sharpening.
   The box is pretty nice, with some minor dirt, Fine ................. $185.00
   Picture

5. STANLEY NO. 26, SCREWDRIVER BIT, Made in USA, 1/4 in. Tanged for a brace. Has had little use, Fine ............ $15.00
   Picture

6. STANLEY, SCREWDRIVER BIT, Made in USA, 1/2 in. Tanged for a brace. Doesn't look like it had any use, but there is a bit of light rust, Fine ............ $15.00
   Picture

7. STANLEY, NO. 2 PHILLIPS SCREWDRIVER BIT, Made in USA, Tanged for a brace. New ............ $15.00
   Picture

8. MAYHEW COUNTERSINK BIT, Tanged. 5/8 inch. May be for metalwork because there is no bevel to the cutters, G+, ............ $10.00
   Picture

9. D. FLATHER & SONS, COUNTERSINK BIT, for a bitstock, G+ ............ $7.50
   Picture

10. STANLEY, NO. 128 EXPANSIVE BIT, The small sze that bores 1/2 to 1 1/2 inch holes. Has seen little use, Fine ............ $20.00
    Picture

11. In the Box IRWIN NO. 22, EXPANSIVE BIT, Large size. Micro-dial. Has 2 cutters to drill from 7/8 to 3 inch holes. Has had little use. In the original box with protective but missing the inside insert, Fine ............ $30.00
    Picture

12. In the Box IRWIN NO. 2, EXPANSIVE BIT, Large size. Has 2 cutters to drill from 7/8 to 3 inch holes. May need a bit of sharpening, G+ ............ $22.00
    Picture

13. CLARK EXPANSIVE BIT, Large size. Has 2 cutters to drill from 7/8 to 3 inch holes, In the original Conn. Valley Mfg. Co. box. The box is missing some of the end-flaps, Fine ............ $30.00
    Picture

14. SARGENT EXPANSIVE BIT, Large size. Has 2 cutters to drill from 7/8 to 3 inch holes, Still has most of the nickel plating, Fine ............ Sold $20.00
    Picture

15. MILLERS FALLS 18 inch EXTENSION BIT HOLDER, Has a Barber patent chuck which holds square tapered shanks and many sizes of round and irregular shanks. I think this seems to be built for a longer reach, because the chuck isn't going to follow a bit into a hole. Has been cleaned, G+ ............ $55.00
    Picture

16. STANLEY NO. 180, 18 inch BIT EXTENSION. Made to follow bits 11/16 and larger. Two small spots of pitting on the shank, Fine ............ $35.00
    Picture

17. Boxed NORTH BROS. YANKEE NO. 2150, 21 inch BIT EXTENSION. Made to follow bits 11/16 and larger. Blued finish is probably from WW II. One end of the box is ripped open a bit, Fine ............ $50.00
    Picture

18. NORTH BROS. YANKEE NO. 2150, 24 inch BIT EXTENSION. Made to follow bits 11/16 and larger. Some light patina, G++ ............ $35.00
    Picture

19. Boxed STANLEY NO. 59 DOWELING JIG. Used to bore holes in boards to hold dowels that increase the strength of the joint, or keep boards firmly together, as in a table top. This vintage Stanley is considered the best.
    In the original box with instructions. Complete with six guides, 3/16, 1/4, 5/16, 3/8, 7/16, and 1/2 inch, and the bit depth stop. The box is very crisp with some minor damage to the top. Includes the original instructions, Fine ............... $60.00
    Picture

20. Boxed STANLEY NO. 59 DOWELING JIG, Later model. Complete with all six guides, 3/16, 1/4, 5/16, 3/8, 7/16, and 1/2 inch, and the bit depth stop. 99% nickel plating remains. In the original box, which is poor with no label. I will include a copy of the instructions, Fine ............... $45.00
    Picture

21. Boxed STANLEY NO. 59 DOWELING JIG, A later model box. Has all six guides, 3/16, 1/4, 5/16, 3/8, 7/16, and 1/2 inch, and the later bit depth stop. Has all of the nickel plating. In the original box. I will include a copy of the instructions, Fine+ ............... $55.00
    Picture

22. STANLEY NO. 47 BIT GAUGE, for auger bits. The later style by Stanley with a springy rod. Marked Pat. Pend. All of the nickel plating remains, Fine+ ........ $40.00
    Picture

23. STANLEY NO. 49 BIT GAUGE, for auger bits, like new, in its original box, which is very crisp, Fine+ ................ $30.00
    Picture

24. STANLEY NO. 49 BIT GAUGE, for auger bits. An early one that's marked Pat. Apl'd For. They it has most of its nickel plating, but, it's a little dirty, G++ ........ $10.00
    Picture

25. CINCINNATI TOOL CO. BIT DEPTH STOP, for auger bits. Clamps on the side of an auger bit to adjust for depth. The small one for bits up to one inch in diameter, G+ ................ $55.00
    Picture

    Single Bits

26. Single Bits

    I've ended up with several nice bits that don't fit into any of my sets. Maybe you are looking for some to complete your set. They may need a bit of sharpening.

    3/16 inch RUSSELL JENNINGS BIT. Can use a touch-up sharpening, G+ ............ Sold $15.00
    Picture

    5/16 inch STANLEY NO. 100, RJ BIT, Marked Russell Jennings, No. 100, Stanley, 100 plus, and Made in USA. May need a sharpening touch-up, Fine ............ Sold $15.00
    Picture

    9/16 inch STANLEY NO. 100, RJ BIT, Marked Russell Jennings, No. 100, Stanley, 100 plus, and Made in USA. May need a sharpening touch-up, Fine ............ Sold $15.00
    Picture

    10/16 inch STANLEY NO. 100, RJ BIT, Marked Russell Jennings, No. 100, Stanley, 100 plus, and Made in USA. May need a sharpening touch-up, Fine ............ Sold $15.00
    Picture

    10/16 inch STANLEY NO. 100, RJ BIT, Marked Russell Jennings, No. 100RJ, Stanley, 100 plus and Made in Australia, Fine ............ $10.00
    Picture

    12/16 inch STANLEY NO. 100, RJ BIT, Marked Russell Jennings, No. 100, Stanley, 100 plus, and Made in USA. May need a sharpening touch-up, Fine ............ Sold $15.00
    Picture

    14/16 inch STANLEY NO. 100, RJ BIT, Marked Russell Jennings, No. 100, Stanley, 100 plus and Made in USA, Fine ............ Sold $15.00
    Picture

    16/16 inch STANLEY NO. 100, RJ BIT, Marked Russell Jennings, No. 100, Stanley, 100 plus and Made in USA, Fine ............ Sold $15.00
    Picture

    16/16 inch STANLEY NO. 100, RJ BIT, Marked Russell Jennings, No. 100, Stanley, 100 plus, and Made in USA. May need a sharpening touch-up, Fine ............ Sold $15.00
    Picture

    1 1/4 inch RUSSELL JENNINGS BIT. (No. 20) Can use a touch-up sharpening, G+ ............ Sold $20.00
    Picture

    1 5/8 inch IRWIN BIT (No. 26), Can use a touch-up sharpening, G+ ............ Sold $15.00
    Picture

27. GREENLEE 1 1/4 INCH CAR BIT, length is 16 1/2 inches. Sort of a hollow center helical twist with a tanged end. I have a 3/4 inch Greenlee with the same twist that I use for electrical work, and it bores very quickly. Fine ....... $30.00
    Picture

Drills

[CLICK TO ORDER]

1. NORTH BROS. YANKEE NO. 1530A, HAND DRILL, With plain, right- and left-hand ratchet and double-right-hand movement. 3-jaw chuck with 3/16 capacity. Most of the original finishes remain, with minor wear. All of the ratchets are functioning, Fine ............... Sold $75.00
   Picture

2. GOODELL PRATT NO. 8 BENCH DRILL PRESS, Eleven inches high from the bench. 3- jaw chuck has a 0 to 1/4 inch capacity. Fitted with the vise attachment, G+ ............... $165.00
   Picture

3. MILLERS FALLS NO.13A BREAST DRILL. An unusually attractive, early breast drill. Feby 18, 1890 patent date on the chuck. Has a nickel plated frame with a level, rosewood handles, Barber chuck with alligator jaws, and red paint with gold striping on the large gear. G+ ..................... $95.00
   Picture

4. MILLERS FALLS NO. 2A HAND DRILL. This one's the large size, 14 1/2 inches long. A strong, serviceable tool built on a sturdy cast frame. Three-jawed chuck with protected spring holds 0 to 3/8 round shank bits. Spindle equipped with ball thrust bearings. Tropical hardwood handle and knob. The handle is nice, and unscrews to hold all eight NOS bits. 99% of the red and black enamel. Smooth action, Fine+ ...... $130.00
   Picture

5. MILLERS FALLS NO. 353 RATCHET HAND DRILL, 3-jaw chuck holds bits from 0 to 3/16 inch. All metal except for the knob. Ratcheting action on drive gear. Solid steel frame, 11 inches long; hollow end handle, handsomely knurled, with removable screw cap, G+ .......... $50.00
   Picture

6. MILLERS FALLS NO. 77A HAND DRILL, 12 inches overall. 3-jaw Star chuck holds bits from 0 to 1/4 inch in diameter. Machine-cut gears. Mahogany finished hardwood handles. Some light rust, G++ .......... $35.00
   Picture

7. STANLEY NO. 610, HAND DRILL, The smaller size with 1/4 inch capacity three-jaw chuck. Has a higher spindle torque for easier drilling. Cast aluminum enclosed gearbox to protect bearings from dust. Has some tool-box dings, but fully functional, G+ .......... $25.00
   Picture

8. CRAFTSMAN HAND DRILL, Made by Millers Falls. Three-jaw chuck holds round bits 1/4 to 0 inches. Stained hardwood hollow handle holds bits, which are gone. Almost all of the original finishes remain, Fine .......... $45.00
   Picture

[CLICK TO ORDER]

1. STANLEY "YANKEE" NO. 3412, Offset ratchet screwdriver. Right- or left-hand action. No. 1 and No. 2 PHILLIPS Bits. About 4 inches overall, Fine .......... 20.00
   Picture

2. STANLEY "YANKEE" NO. 3400, Offset ratchet screwdriver. Right- or left-hand action. 7/32 and 5/16 inch straight blades. About 4 inches overall, Fine .......... 20.00
   Picture

3. STANLEY "YANKEE" NO. 3800, Offset ratchet screwdriver. Right- or left-hand action. 3/8 and 9/16 inch straight blades. About 4 3/4 inches overall, Fine .......... 20.00
   Picture

4. BMC, NO. 123, Offset ratchet screwdriver Set. Right- or left-hand action, the handle lifts and moves to each side. 3/16, 1/4, and 5/16 blades. About 4 1/2 inches overall, Fine .......... 35.00
   Picture

5. GOODELL PRATT, NO. 668, Offset ratchet screwdriver. Right- or left-hand action, the bit moves to each side. Sept 16, 1924 patent date. About 4 inches overall. 92% of the black and orange enamel remains, Fine .......... 40.00
   Picture

6. Boxed STANLEY, "YANKEE" NO. 41 PUSH DRILL, Has all eight bits from 1/16 to 11/64ths that may need a bit of sharpening. 99% of the nickel plating remains. The box is very nice, Fine+ ......... $80.00
   Picture

7. STANLEY, NORTH BROS. "YANKEE" NO. 41, PUSH DRILL, Has all eight bits from 1/16 to 11/64ths. Virtually all nickel plating remains. Some of the bits may need a touch-up sharpening, Fine ......... $60.00
   Picture

8. STANLEY, NORTH BROS. "YANKEE" NO. 41, PUSH DRILL, Has all eight bits from 1/16 to 11/64ths. Virtually all nickel plating remains with one spot of wear. Some of the bits may need a touch-up sharpening, Fine ......... $50.00
   Picture

9. STANLEY, NORTH BROS., "YANKEE" NO. 41, PUSH DRILL, Has all eight bits from 1/16 to 11/64ths in the handle. Some of the nickel plating is worn from use. Some may need a bit of touch-up sharpening, G+ ......... $40.00
   Picture

10. Boxed MILLERS FALLS NO. 188A AUTOMATIC PUSH DRILL, complete with 8 bits. This is the MF style of the Yankee No. 45. It has the advantage of 8 holes in the top to hold the bits, so, just turn to the size you want. The bits are the Millers Falls style with the cross-top, and are in nice condition. The box has some wear, Fine .......... $60.00
    Picture

11. STANLEY NORTH BROS. "YANKEE" NO. 30A , Spiral Ratchet Screwdriver, This is the smaller one (compared with the 131), with the original three straight bits. In the original box .......... $55.00
    Picture

12. MILLERS FALLS NO. 55, RATCHET SCREWDRIVER, Small one with a three-inch blade, G++ .......... Sold $30.00
    Picture

13. STANLEY "YANKEE" NO. 10A, RATCHET SCREWDRIVER, 4 inch blade length, Painted wood handle is missing some finish, G+ ......... $30.00
    Picture

14. NORTH BROS. "YANKEE" HANDYMAN NO. 2H, RATCHET SCREWDRIVER, The whole tool is only four inches long, Fine .......... $22.00
    Picture

15. NORTH BROS. "YANKEE" NO. 12, RATCHET SCREWDRIVER, Stubby 1 1/8 inch blade length, Red wood handle. The screwdriver looks like new, but the 5/32nd blade has been sharpened a bit, Fine .......... $35.00
    Picture

16. STANLEY "YANKEE" NO. 15, RATCHET SCREWDRIVER, 5 1/2 inch blade length. Painted wood handle has some worn finish. Nice nickel plating, G+ ......... $30.00
    Picture

17. NORTH BROS. "YANKEE" NO. 15, RATCHET SCREWDRIVER, 1 1/2 inch blade length, 4 3/4 inches overall. Stained wood handle. Has the Nov-2-97 and May-1-06 patent dates. Missing a lot of the nickel from wear, G ......... $20.00
    Picture

[CLICK TO ORDER]

MILLERS FALLS AND GOODELL PRATT PUSH DRILLS ...

1. MILLERS FALLS NO. 6100 CHUCK & 8 DRILLS, A complete set of eight bits that fit the Millers Falls push drills and also fit the Yankee No. 41, 45 and 46 push drills. The chuck fits the Millers Falls No. 61, and also the Yankee No. 30 and 130 screwdrivers. In the original tube, Fine ................. Sold $50.00
   Picture

   STANLEY No. 33, 35, 133, 135, 233, SERIES PUSH DRILLS ...

   1. STANLEY "YANKEE" NO. 333H BIT SET, but will fit the other screwdrivers in this section. Three drill points, 1/16th, 7/64, and 9/64, in the original plastic tube with label, Fine+ ..................... $20.00
      Picture

   2. SCREWDRIVER BIT SET , I don't know the manufacturer, it may be Millers Falls, but will fit all the screwdrivers in this section. Three drill points and two screwdriver bits, in the original plastic tube, Fine+ ..................... $30.00
      Picture

   3. STANLEY YANKEE" DRILL POINTS, I have only the 7/64 and 9/64 left. New Old Stock ................. $4.00 each
      Picture

   4. STANLEY "YANKEE" SCREWDRIVER BIT, A 5/32 inch straight bit. It's the top one in the picture. New Old Stock ................ $7.00 ea.
      Picture

   5. STANLEY "YANKEE" COUNTERSINK BIT, It's the top one in the picture. New Old Stock ................ $15.00 ea.
      Picture

      STANLEY No. 41, 44, 45, & 46 PUSH DRILLS ...

   6. STANLEY "YANKEE" DRILL POINTS. Eight drill points, 1/16th to 11/64ths, in the original plastic tube, for the No. 41, 44, 45 and 46 push drills. New Old Stock, Fine ..................... $50.00
      Picture

   7. STANLEY "YANKEE" NO. 04-069 DRILL POINTS. Eight No. 41 drill points, 1/16th to 11/64ths, on the original card, NOS ..................... $50.00
      Picture

   8. STANLEY "YANKEE" DRILL POINTS. Fit the No. 41, 45 and 46 push drill. I don't have complete sets individually now (I am looking), but most of you are looking for the smaller ones. I now have many of three smaller sizes...
      No. 2 size. 5/64ths
      No. 3 size. 3/32nds
      No. 5 size. 1/8th
      Price includes first class mail in an envelope for US locations.
      Any one, New ....... $10.00
      Any Two, New ....... $14.00
      Any three, New ..... $18.00
      More than three, New $18.00 plus $4.00 each after three.
      Picture

      STANLEY No. 30, 130 SCREWDRIVER ...

   9. NORTH BROS. "YANKEE" Chuck adapter for drill points, N O S. Will hold the No. 41 drills .................................... $8.00 ea.
      Picture

   10. NORTH BROS. "YANKEE" BIT W/ SCREW-EYE HOLDER, Pat Mar 24, 08 stamped on collar. For the No. 30 (130) and No. 20. 3 1/2 inches long, New Old Stock .............. size=3 color=ff3333>Sold $50.00 ea.
       Picture

   11. NORTH BROS. "YANKEE" BIT W/ SCREW HOLDER, For the No. 30 (130) and No. 20. Size 2 - 1/4 inch, 4 1/2 inches long. Pat Aug 27 1907 stamped on the spring, New Old Stock .............. $60.00 ea.
       Picture

   12. STANLEY "YANKEE" The three bit sizes that originally came with the screwdriver. New Old Stock ................. Sold $18.00
       Picture

   13. STANLEY "YANKEE" SCREWDRIVER BIT, A 5/16 inch straight bit. New Old Stock ................. $7.00 ea.
       Picture

   14. STANLEY "YANKEE" 68-132 PHILLIPS BIT, No. 2 size (medium) Phillips bit for the No. 30 or 130, New ................. $15.00
       Picture

   15. STANLEY "YANKEE" PHILLIPS BIT, No. 3 size (large) Phillips bit for the No. 30 or 130, New ................. $15.00
       Picture

   16. STANLEY "YANKEE" NUT-DRIVER BIT, For 3/16 or 5/16 (Sold) nut sizes. New Old Stock, ................. $15.00 ea.
       Picture

       STANLEY No. 31, 131 SCREWDRIVER ....

   17. STANLEY CHUCK ADAPTER & 8 DRILLS, A complete set of eight bits that fit the Stanley 31 and 131 push screwdrivers and the bits also fit the Yankee No. 41, 45 and 46 push drills. They have had some use and may need a bit of sharpening. In the original tube, G++ ................. $40.00
       Picture

   18. NORTH BROS. "YANKEE" Chuck adapter for drill points, N O S. Will hold the No. 41 drills .................................... $8.00 ea.
       Picture

   19. STANLEY "YANKEE" 3 SCREWDRIVER BITS, A 1/4, 9/32, and 5/16 inch straight bit. Complete set for the screwdriver, New Old Stock ................. $18.00
       Picture

   20. STANLEY "YANKEE" SCREWDRIVER BIT, A 1/4 inch straight bit. New Old Stock ................. $7.00 ea.
       Picture

   21. STANLEY "YANKEE" SCREWDRIVER BIT, A 5/16 inch straight bit. New Old Stock ................. $7.00 ea.
       Picture

   22. STANLEY "YANKEE" PHILLIPS BIT, No.2 Phillips bit (the most common-size one). New Old Stock on a card ................. Sold $9.00 ea.
       Picture

   23. STANLEY "YANKEE" PHILLIPS BIT, No.3 Phillips bit (the big one). New Old Stock, ................. Sold $12.00 ea.
       Picture

   ---

   Back To Tool Index Back to Homepage